2013년 10월 16일 수요일

Hitachi HH0-210 최신덤프

우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히Hitachi HH0-210관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재Hitachi HH0-210인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.

ITExamDump에서 제공해드리는 Hitachi인증 HH0-210덤프는 가장 출중한Hitachi인증 HH0-210시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. Hitachi인증 HH0-210덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?

Hitachi HH0-210인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Hitachi HH0-210시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.

Hitachi HH0-210인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는Hitachi HH0-210있는지 없는지에 알고 싶어합니다. 만약Hitachi HH0-210자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.

시험 번호/코드: HH0-210
시험 이름: Hitachi (HDS Certified Implmenter-Enterprise)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-10-15

HH0-210 덤프무료샘플다운로드하기: http://www.itexamdump.com/HH0-210.html

NO.1 Which two steps must be taken when performing a microcode exchange on a Hitachi Universal
Storage Platform VM? (Choose two.)
A.Disconnect the SVP from the customer LAN.
B.Confirm that all components are at the correct starting code level.
C.Update SVP microcode last.
D.Resolve all SIMS before beginning a microcode exchange.
ANSWER: BD

Hitachi   HH0-210   HH0-210   HH0-210   HH0-210

NO.2 A TrueCopy project has the following requirements: Copy from site_A (Host_A) to site_B (Host_B).
You have defined two instances (horcm0.conf and horcm1.conf) for the application and one Command
Device (CMD_A on site_A and CMD_B on site_B.)
What are two valid combinations of distributing the instances and defining access to the Command
Devices on the different sites? (Choose two.)
A.Host_A has access to CMD_A and CMD_B and runs horcm0.conf and horcm1.conf.
B.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_A and runs
horcm1.conf.
C.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
D.Host_A has access to CMD_B and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
ANSWER: AC

Hitachi   HH0-210자격증   HH0-210기출문제   HH0-210

NO.3 What information is displayed on the Information tab page of Storage Navigator? (Choose two.)
A.the device view of the connected system
B.the product name of the connected system
C.the information for the root user of the connected device
D.the microcode version of the storage system
ANSWER: BD

Hitachi   HH0-210   HH0-210 dump   HH0-210 pdf

NO.4 A customer is using a Hitachi Enterprise storage system with clustered servers in an active/passive
relationship.
What must be done in Hitachi Dynamic Link Manager (HDLM) to ensure that the status of inactive paths
on both passive and active nodes is monitored regularly?
A.Switch on Auto failback.
B.Setup intermittent Error Monitoring.
C.Switch on Path Health Check.
D.Set the reservation level to 2.
ANSWER: C

Hitachi   HH0-210   HH0-210

NO.5 To which two LANs must the SVP of a Hitachi Universal Storage Platform V be attached? (Choose two.)
A.customer's intranet
B.USP V internal LAN
C.HiTrack dedicated user port
D.secure management LAN
ANSWER: BD

Hitachi   HH0-210   HH0-210 pdf   HH0-210시험문제   HH0-210

NO.6 You have created a Storage Device List and some User Accounts within Storage Navigator. The SVP
has since failed and must be replaced.
How can you create a backup of this information so it can be easily restored after the failed SVP is
replaced?
A.Restore the ghost image available on the SVP.
B.Use HiSat to keep track of the information in a CSV format.
C.Ask the customer engineer to copy the source files from the SVP.
D.Use the download configuration function of the Storage Navigator control panel.
ANSWER: D

Hitachi최신덤프   HH0-210 pdf   HH0-210   HH0-210   HH0-210   HH0-210

NO.7 What is the purpose of the System Assurance Document?
A.to ensure accurate and complete record of pre-installation data
B.to guarantee that HDS equipment is insured during transportation
C.to inform a channel partner that equipment is available for shipment
D.to validate configuration changes for customers with a premium service contract
ANSWER: A

Hitachi자료   HH0-210 pdf   HH0-210   HH0-210 dump

NO.8 You are connecting a Hitachi AMS2000 Family (AMS) system as external storage behind a Hitachi
Universal Storage Platform V. You are using one path to each controller on the AMS2000 system.
Which statement describes how to complete the configuration?
A.Enable intermittent error monitoring for both paths.
B.Set path mode to "Multi".
C.No special setting is needed.
D.Set the primary path to point to the AMS default controller.
ANSWER: C

Hitachi기출문제   HH0-210   HH0-210   HH0-210인증

NO.9 You need to enable Copy-on-Write SnapShot software on a Hitachi Universal Storage Platform VM.
Which two are required? (Choose two.)
A.remote replication license
B.ShadowImage license
C.additional cache memory
D.additional shared memory
ANSWER: BD

Hitachi   HH0-210 pdf   HH0-210시험문제   HH0-210덤프   HH0-210

NO.10 Which three factors must be considered when planning a Non-stop SCSI microcode exchange on a
Universal Storage Platform V? (Choose three.)
A.Force production host data paths to failover to the alternate cluster.
B.Schedule a time when the I/O workload is low.
C.Confirm that all LUNs, external storage, and remote replication links have multiple paths across both
clusters.
D.Save the contents of the shared memory to the SVP hard disk.
E.Ensure that the microprocessors are less than 50 percent busy.
ANSWER: BCE

Hitachi최신덤프   HH0-210   HH0-210   HH0-210   HH0-210 pdf   HH0-210

NO.11 Which two activities can be performed without interrupting user access to data in a Hitachi Enterprise
storage system? (Choose two.)
A.Upgrade Cache Memory from 32GB to 64GB.
B.Run the CUDG4 (Control Unit DiaGnosis) test.
C.Change the DKC system emulation type.
D.Change a 2Gbps Fibre Channel feature to a 4Gbps Fibre Channel feature.
ANSWER: AD

Hitachi   HH0-210시험문제   HH0-210   HH0-210

NO.12 You are installing a new Hitachi Universal Storage Platform V system and need to exchange the short
wave SFP transceivers with the long wave type.
To perform the exchange, which two actions are required? (Choose two.)
A.Confirm successful replacement by checking that SFP indicators have changed from blue to green on
the Storage Navigator main screen.
B.Run the SFP exchange wizard.
C.Set SFP mode on the SVP.
D.Confirm successful replacement by checking 'SFP kind' information on the maintenance screen.
ANSWER: CD

Hitachi dumps   HH0-210기출문제   HH0-210 dumps   HH0-210   HH0-210 pdf

NO.13 You install a temporary license for a specific feature.
How long is the feature available on a Hitachi Enterprise storage system?
A.45 days
B.90 days
C.120 days
D.180 days
ANSWER: C

Hitachi   HH0-210   HH0-210인증   HH0-210   HH0-210   HH0-210최신덤프

NO.14 Which three microcode exchange procedure modes are available in a Hitachi Enterprise storage
system? (Choose three.)
A.Alternate SCSI path
B.Non-Stop SCSI host
C.Postponed SCSI path
D.Skip SCSI microprocessor
E.Skip SCSI channel adapter
ANSWER: ABE

Hitachi자료   HH0-210최신덤프   HH0-210   HH0-210인증

NO.15 Which two topology settings should be used when connecting a Hitachi Universal Storage Platform V
to a SAN switch? (Choose two.)
A.Public Loop
B.Private Loop
C.Point-to-Point
D.Fabric
ANSWER: CD

Hitachi   HH0-210   HH0-210자격증   HH0-210   HH0-210   HH0-210

NO.16 Which ShadowImage operation is permitted when using Storage Navigator?
A.Manage pairs and manage consistency groups
B.Manage pairs but not manage consistency groups
C.Manage pairs only within consistency groups
D.Manage pairs in journal groups
ANSWER: B

Hitachi자격증   HH0-210   HH0-210   HH0-210 dump   HH0-210자격증

NO.17 When is a microcode exchange process complete on a Hitachi Universal Storage Platform V?
A.When the message "An exchange of a microprogram finished" is displayed.
B.When all I/O resumes across all the mapped storage paths.
C.Once the SVP has rebooted.
D.When all the microprocessors flash memory update is complete.
ANSWER: D

Hitachi   HH0-210자료   HH0-210   HH0-210 dumps

NO.18 After completing a Hitachi Universal Storage Platform V installation or before upgrading the microcode,
which tool must you use to ensure that the SVP can communicate with all components of the system?
A.ping
B.traceroute
C.a network sniffer
D.diags LAN TEST
ANSWER: D

Hitachi   HH0-210   HH0-210

NO.19 You are enabling the Syslog transfer in Storage Navigator to send the Syslog output to the primary
Syslog server.
Which two additional settings must be made to allow the transfer? (Choose two.)
A.the primary server subnet settings
B.the IP address of the primary server
C.the Syslog file format
D.the port number for the primary server
ANSWER: BD

Hitachi   HH0-210   HH0-210   HH0-210

NO.20 Which three statements describe the Service Processor (SVP) of the Hitachi Universal Storage
Platform VM? (Choose three.)
A.The SVP does have a display and keyboard.
B.The SVP has access to user data stored on the system.
C.Connecting the SVP with a service center enables remote maintenance of the system.
D.The SVP collects performance data for all key components of the system.
E.The SVP enables the service representative to configure, maintain and upgrade the system.
ANSWER: CDE

Hitachi   HH0-210시험문제   HH0-210   HH0-210 dumps

ITexamdump의 HP3-C33덤프의 VCE테스트프로그램과 644-068덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J61시험에 대비한 고품질 덤프와 200-001시험 최신버전덤프를 제공해드립니다. 최고품질 74-344시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HH0-210.html

댓글 없음:

댓글 쓰기