Motorola Solutions인증MSC-235시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Motorola Solutions인증MSC-235시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.
ITExamDump는 많은 분들이Motorola Solutions인증MSC-235시험을 응시하여 성공하도록 도와주는 사이트입니다ITExamDump의 Motorola Solutions인증MSC-235 학습가이드는 시험의 예상문제로 만들어진 아주 퍼펙트한 시험자료입니다. Motorola Solutions인증MSC-235시험은 최근 가장 인기있는 시험으로 IT인사들의 사랑을 독차지하고 있으며 국제적으로 인정해주는 시험이라 어느 나라에서 근무하나 제한이 없습니다. ITExamDump로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.
시험 번호/코드: MSC-235
시험 이름: Motorola Solutions (Design and Deploy for MOTOTRBO Connect Plus Solutions BETA)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 130 문항
업데이트: 2013-11-11
Motorola Solutions 인증MSC-235시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Motorola Solutions 인증MSC-235덤프자료에 주목하세요. ITExamDump의 Motorola Solutions 인증MSC-235덤프는 오로지 Motorola Solutions 인증MSC-235시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.
네트워크 전성기에 있는 지금 인터넷에서Motorola Solutions 인증MSC-235시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Motorola Solutions 인증MSC-235시험을 한방에 통과하도록 도와드립니다.
MSC-235 덤프무료샘플다운로드하기: http://www.itexamdump.com/MSC-235.html
NO.1 If there is a failure or reboot of a site controller, which of the following must you consider
regarding
Over The Air (OTA) file transfers (select TWO)?
A. Any transfers in progress at the time of the failure may have to be repeated.
B. The controller will have to be re-entitled for OTA operation after it is back online.
C. If the site controller recovers on a different Control Channel, transfers may have to be
reconfigured.
D. Any pending transfers on that controller will be lost and must be re-queued.
Answer: A,D
Motorola Solutions최신덤프 MSC-235 dumps MSC-235 pdf
NO.2 A Request for Proposal (RFP) for a single-site, operations-critical customer requires you to
respond to the following requirement: “...if the RF site equipment includes network switches,
describe the system behavior in the event of a site LAN switch failure.” Which of the following is
the BEST response to this requirement?
A. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed,the
failure of a site LAN will not affect calls in-progress, but will make it impossible for subscribers to
register at the site.
B. If the single site LAN switch fails, the site master repeater will begin broadcasting failsoft
messages. All subscribers will revert to failsoft operation. The users may select any site repeater
on which to communicate conventionally.
C. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed, the
failure of a site LAN switch will cause all calls to drop and the subscribers will attempt to roam to
an operational site.
D. In the case of a single-site system, Connect Plus does not utilize site LAN switches.
Answer: C
Motorola Solutions덤프 MSC-235 MSC-235최신덤프 MSC-235자격증 MSC-235 dumps
NO.3 You are designing a 3 site Connect Plus system with 12 repeaters per site, no site controller
redundancy, and 3 control channel-capable repeaters at each site. The average number of
subscribers active at a site may approach 300 at any given time of the day. If this customer
experiences a site controller failure, what symptoms and subscriber behavior would you expect
immediately after the failure occurs?
A. All calls in progress at the site will drop. Subscribers will automatically fall back to digital
conventional, allowing users to utilize any of the site’s repeaters.
B. All calls in progress at the site will drop. All subscribers will attempt to roam to one of the other
sites.
C. Calls in progress will remain until one of the other control-channel capable repeaters assumes
the site controller’s role and then they will drop and register on the new controller.
D. Calls in progress will stay up until they complete normally. Subscribers on the control channel
will attempt to roam to one of the other sites.
Answer: B
Motorola Solutions MSC-235 dump MSC-235 MSC-235 MSC-235인증 MSC-235최신덤프
NO.4 Your customer is a rail operator whose system covers approximately 125 kilometers (77 miles)
of
track. Trains travel rapidly, and the operator is using a location tracking application to update their
displayed location as frequently as possible. Location updates are critical, even if this means
putting voice calls into the busy queue. What can you do to ensure this behavior?
A. Make sure that RSSI settings are set to -ll3dBm or less for “RSSI Preferred” in the mobiles in
the trains. This will allow the proper sensitivity to make frequent location updates possible. Give
individual SU records a lower priority than any talkgroup priority.
B. Enhanced GPS must be enabled in the Repeaters and Subscribers. Give individual SU records
a higher priority than any talkgroup priority.
C. Call Sessions Configuration in the Network Manager should be set to 29 for the “Number of
Outbound Data Sessions Allowed” field and somewhat less for the Number of Voice/Inbound Data
sessions field. Give individual SU records a higher priority than any talkgroup priority.
D. Location updates should be optimized by enabling Advanced GPS with GPS Data Revert
channels.
Answer: C
Motorola Solutions dump MSC-235 MSC-235
NO.5 You are using the Network Manager to connect to a multisite system. Where can you view the
current state of connections to other sites in this multisite system?
A. Event Log Viewer
B. RealTime Display
C. Site Status Window
D. MultiSite Configuration Window
Answer: C
Motorola Solutions인증 MSC-235 MSC-235 dumps
NO.6 Your customer operates a 4-site Connect Plus network. Two sites are adjacent to each other,
with
overlapping coverage. The other two sites respectively service two manufacturing plants that are
approximately 900 kilometers (559 miles) apart. There are approximately 30 talkgroups in the
network and 300 subscribers. When creating the Option Board codeplug for this customer’s
portable radios, which of the following is the best strategy to ensure smooth, logical operation?
A. Create a separate zone for each of the 4 sites to contain all the necessary contact and RSSI
settings.
B. Create a single Connect Plus zone that will address all of their necessary RSSI settings and
contact lists.
C. Create 2 Connect Plus zones to contain the different contacts and RSSI settings necessary
with this type of topology.
D. Create 3 separate Connect Plus zones to contain the different contacts and RSSI settings
necessary with this type of topology.
Answer: D
Motorola Solutions MSC-235 MSC-235인증
ITexamdump의 MSC-235덤프의 VCE테스트프로그램과 00M-654덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HH0-050시험에 대비한 고품질 덤프와 70-332시험 최신버전덤프를 제공해드립니다. 최고품질 00M-620시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기